TECH SPECS
Sound
(1) Soundcraft Signature 22MTK mixer
(2) QSC K12.2 speakers (currently hung in the grid)
(1) THS-15 subwoofer/amplifier
(2) Mackie Active speakers (SRM450) with speaker stands
(1) Sennheiser e835 mic
(1) Shure SM58 mic
(1) Shure SM57 mic
(2) boom mic stands
(2) straight mic stands
(1) BEHRINGER ULTRA-DI DI100 (active DI that requires battery or phantom power)
(2) Radial ProD2 Passive Stereo DI
(~4) lengths of 25’ XLR cable, depending on speaker position and setup
Several ¼” audio patch cables
Lights:
All fixtures are conventional (No LEDs) with Edison connections.
(1) ETC Express Light board 24/48
Instruments/Units:
(7) ETC Source Four Ellipsoidal, 575w (36 degree)
(2) ETC Source Four Ellipsoidal, 575w (26 degree)
(6) ETC Source Four PAR, 575w (WFL)
(3) Altman 360q 6x9 Instruments, 575w (similar beam to 36 deg)
(9) Altman 360q 4.5x6.5 Instruments, 575w (similar beam to 50 deg)
(3) Altman 3.5q, 250w (mini-ellipsoidals)
(8) Altman 65q 6” fresnels, 500w
(2) Altman par 64 (1000w, please only circuit in 20A dimmer packs)
(2) Clip Lights
Accessories:
Basic gel stock, Lee and Rosco filters, including diffusion, various cuts.
Please do not cut gel without prior approval.
(10) wooden floor plates
(5) Side Arms
Safety cables for all our fixtures
Gel frames for all our fixtures, except the Par64s
Spare lamps for our units. (Please ask before using)
Cable:
Enough DMX 3-pin (most of it microphone cable) for our rep plot.
Enough edison power extensions for our rep plot. Note that outside our rep plot, we are limited in edison cable.
DMX 3-pin-to-5-pin adapter to run the DMX signal into our lighting board
(1) 50’ 5-pin DMX cable
Video:
(1) Panasonic PT-RZ690LB U7 Projector with an ET_LE160 lens, currently hung in the grid.
(1) Panasonic PT-D400 (XGA, not HD) Projector
(1) Elite Screens Motorized screen 150” diagonal 16:9 AR (7’x12’)
